For expert technical support call:  +44 (0) 1392 791 001  or email: Powered by First Light Optics +44 (0) 1392 791 001
Astro Essentials 2-inch Compression-Ring adapter for Sky-Watcher Newtonians and 72ED Refractor (M54)

Astro Essentials 2-inch Compression-Ring adapter for Sky-Watcher Newtonians and 72ED Refractor (M54)

  (6 Reviews)
✓ 2 year warranty


In stock shipped 1-2 working days.

About this product

Model:  flo_comp_ring_adapter_synta_focuser_m54

Screws directly to the M54 thread on the Sky-Watcher Newtonian or 72ED refractor focuser drawtube.

The brass compression-ring firmly grips any accessory with a 2" nosepiece.

Optical length 10mm.

Easy to fit: Simply unscrew the existing eyepiece/accessory holder then screw this one on. 

Also suitable for equivalent Celestron and Orion telescopes. 

Customer reviews

Average Rating (6 Reviews):  
Write a Review and share your opinions!

Rating (max 5):  
Huge improvement over standard SkyWatcher focuser connection
Monday, 4 March 2019  | 

I've a pair of Skywatcher newtonians - an 8" Quattro and a 500p. Neither came with compression 2" fittings, and given that both of these scopes are F/4 or lower, a Paracorr or similar is a really good idea for visual use. Unfortunately the standard SkyWatcher 2" eyepiece connection will not allow a Paracorr through to the focuser tube, meaning one cannot reach focus with the standard interfaces as supplied.
This compression-ring adapter replaces the SkyWatcher screw-in adapter that has two thumbscrews only, with a fitting that has the brass compression ring. This means that the Paracorr can fit all of the way through into the focuser and can be tightly held without any possibility of marring the tube of the eyepieces or the Paracorr itself.
This replacement fitting does exactly what it says on the tin, and then just gets right out of the way, exactly like the best designs do.
I cannot recommend this fitting highly enough. If you have a Skywatcher newtonian and either you want to use a Paracorr or you want to have non-marred eyepieces, then this is the fitting for you.

Rating (max 5):  
FLO Compression-Ring adapter for Sky-Watcher Newtonians (M54)
Friday, 25 January 2019  | 

To get prime focus with my 10" skywatcher dob, i was searching for something like this. The standard ring adapter had a groove in it. If you want to attach a dslr, it would not go deep enough in.
This is a groove less adapter ring, so with a 2" UltraWide True-2 Prime Focus Adapter attached to my dslr and this ring in the draw tube i now get prime focus super easy! This is perfect!
The quality is really good, sturdy material. Now i can finally take pictures with my dob. Shipping went like a charm. Clear skies!

Rating (max 5):  
excellent quality product
Thursday, 29 November 2018  | 

Excellent fit and finish, large thumbscrews, secure grip. Nothing to complain: works great as advertised. 5 stars all the way!

Rating (max 5):  
Upgraded my 200PDS
Tuesday, 27 November 2018  | 

Added this to my 200PDS and it holds my Skywatcher Coma corrector with attached ASI1600MM-C firmly in place without marking the coma corrector.

Rating (max 5):  
Causes tilt with a Baader MPCCMKIII
Thursday, 20 September 2018  | 

While I acknowledge that the design of the Baader MPCCMKIIIs barrel is not the best in terms of how it interacts with a compression fitting and this likely works fine with a SWCC, I feel that as the MPCCMKIII is probably the most popular Coma Corrector used on Sky-watcher Newtonians the opportunity to account for the MPCCMKIII in the design of this item was missed. In the end I went back to using the original.

Rating (max 5):  
Upgrade for my Orion 10 DOB focuser
Wednesday, 7 February 2018  | 

Just wanted to stop any marking of my 2" EP etc. Don't know why manufacturers don't fit compression rings to focusers as standard.
Screw the old one off and on with the new. Not up to Baader quality but not Baader prices either.
Does the job well. I like the larger thumbscrews with good length so you can tighten without having to fiddle about at the base of the EP .


Please fill in the form below to ask a question.

Related Products
Sky-Watcher Quattro f4 Imaging Newtonian