For expert technical support call:  +44 (0) 1392 791 001  or email:  info@ikarusimaging.com Powered by First Light Optics +44 (0) 1392 791 001   info@ikarusimaging.com
Astrodon LRGB Gen2 I-Series Tru-Balance Filters
  Zoom

Astrodon LRGB Gen2 I-Series Tru-Balance Filters

£554.00✓ 2 year warranty
Choose:  

Size:  



:  

Usually shipped 10-15 working days.

About this product

Model:  ad_lrgb_gen2-l_set_1.25
Part Number:  LRGB2_I27R

Astrodon LRGB Gen2 I-Series Tru-Balance Filters are designed to approximately equalise the flux of  Interline CCD detectors (formerly Kodak), including compensation for the solar photon flux.  The I-Series filters compensate for the lower red response of these Interline detectors affecting the design of the Green and Red filters.  The Luminance and Blue filters are the same as those in our E-Series.  This means that your RGB colour combine weights will be approximately 1:1:1 within perhaps 10% for equal length exposures.  This can never be perfect, but it does allow you to take one exposure time for all of your RGB data and therefore, only just one corresponding dark exposure time.  Again, this saves you precious imaging time and thus, simplifies your imaging.

  • Set includes Luminance (NIR/UV-blocked colourless), Red, Green and Blue filters
  • 1.25″ mounted, 31, 49.7 mm dia.
  •  3 +/-0.025 mm single 1/4 wave fused silica substrate before coating
  • 30 arcsec parallelism
  •  ~1:1:1 colour combine weights for G2V white-point for Kodak Interline detectors
  • Equal RGB exposures and one dark time
  • Better colour separation (see spectra)
  • Better colour rendition for galaxies based upon colour theory
  • Significant reflection and star halo reduction
  • Spectral “gap” between green and red filters to reduce the effects of light pollution
  • Highest efficiency blue filter with less UV
  • Correct “teal” OIII colour for planetary nebula (OIII signal >97% in blue and green)
  • Parfocal with Astrodon‘s high-performance narrowband and near-IR Luminance filters
  • Ultra-hard and durable sputtered coatings coated to the edge of each filter
  • Proudly made in the U.S.A.

 

Customer reviews

Be the first to Write a Review for this item!

FAQ

Please fill in the form below to ask a question.