About this product
Part Number: ZWO-ANTIDEW
ZWO anti-dew heater for ASI cooled cameras.
Includes the anti-dew heater strip, zip-tie, Y power cord splitter and two spacers.
The thickness of the anti-dew heater strip is 0.2~0.3mm.
The thickness of the spacers is 0.3mm and 0.5mm. They are used for aligning the camera and EFW.
The Y power cord splitter enables you to use your existing power lead to power both the camera's cooler and the anti-dew heater but please be careful not to exceed your power adapter's maximum recommended amp output.
The anti-dew heater requires 12V / 0.35A DC and produces ~4.2 watts of heat.
Inner Diameter: ~50mm
Outer Diameter: ~75mm
How to fit
1. Tear the protective film off the adhesive tape.
2. Put the anti-dew heater strip on the front facing of the camera and make sure the black cable is in the right position (lining next to the DC plug at the rear end)
3. Tie the black cable with a zip-tie on the camera body.
4. Plug in the power cord.
Your camera should now be dew-free.
What's in the box
- Anti-dew Heater Strip
- Y Power Cord
- 2x Spacers
Please fill in the form below to ask a question.